1¡¢In the 20¡æ , the constituent B will be frozen , before using it , we should mel it out in the place with the hot wind circling , in order to avoiding being deteroprated , it is not allowed to be heated up in part high temperature or long time heated .
2¡¢By taking the catalyzer , we should put on protective glasses and defending gloves .If you are not so careful enough that let the materials touch into your eyes , pls wash by water immediately. If it has been in your skin , pls wash with soap at once , then wash by water .
3¡¢In order to avoid the constituent A to be deteroprated , , pls using it soonly if you have been added the catalyzer .
4¡¢
Because it is easily to be affected with damp , the constituent A and constituent B should be kept escaping from the air .If constituent A is wet , the laniate intensity of the products will be bad and will be easily shrink . If constituent B is wet , it will be more sticky , blennorrhea, even to be solid state , the flexibility resistance will not be good as usual .
5¡¢The A and B material buckets of the foaming machine should be have an airer and whisk , or the raw material will be deteroprated and the materials in the constituent A will be separated . |
